|
Conveying bulk solids can sometimes cause difficulties; sharp-edged, large pieces of undefined shapes, unfavourable feeding conditions, material pile-ups could result in longitudinal cuts or punctures in the belt. SAVA engineers have identified the problem and searched for a technical and cost-efficient solution. Their effort resulted in the development of a RIPCHECK conveyor belt with an additional impact-resistant breaker installed above the carcass.
With regard to the intended use and breaker the following types are available:
- RC type - elastic cross reinforcement with steel cord.
- RCH type - very narrow and elastic reinforcement with steel cord for severe conditions.
- BR type - elastic reinforcement with textile cord (for magnetic separators or in devices for metal detection, used in the timber industry)
|
|
| RIPCHECK STEEL CORD |
RC |
RCH |
| Wire diameter (mm) |
1,19 |
1,19 |
| Distance between the wires (mm) |
Approx. 12,7 |
Approx. 0,6 |
| No. of wires / 10 cm |
7 +/-1 |
35 +/-1 |
Other constructions and widths on request. Ripcheck conveyor belts also in chevron version available.
|
